Enigma Industrial - HCE Engineering S.r.l.
Embedded GNU/Linux solutions

Enigma Industrial

The transition from prototyping to production is simple thanks to this new Enigma Industrial extension.

The new industrial extension board

This extension board (or carrier) for the Enigma CPU module is ready for industrial applications thanks to the 24V (range 11-36V) DC power supply and its standard terminals. The TFT Panel RGB interface (up to 24bit color) with two different connectors make it a low cost solution for graphic terminals and human machine interface with touchscreens from 4.3 up to 10 inches.

At the base system we can add external IOs boards via the RS485 interface with Modbus RTU (Modbus TCP is also available via Ethernet interface), via the CAN 2.0B interface (up to 1Mbit/s) or through internal expansion connector where are located 2xUART, 2xI2C, 1xSPI and 9xGPIO. Also the system supports two RJ45 Ethernet connectors (10/100Mbit and 10/100/1000Mbit) and an optional WiFi IEEE 802.11 b/g/n interface for up to 72Mbps!

warning As for all HCE Engineering products special customizations of the board in order to fit special needs are also available! Feel free to contact us for special requests!

 


Hardware

  • Core Cortex-A5 Atmel SAMA5D3 536MHz
  • 256MB SDRAM DDR2 (optional 512)
  • 256MB NAND
  • 1x RJ45 Ethernet (10/100/1000Mbit)
  • 1x RJ45 Ethernet (10/100Mbit)
  • 1x Wi-Fi IEEE 802.11 b/g/n for up to 72Mbps (optional)
  • 1x USB 2.0 host port (on standard connector)
  • 1x USB 2.0 host port (on header connector)
  • 1x USB 2.0 host/device port (on header connector)
  • 1x microSD 4bit
  • 2x RS232 interfaces
  • 1x RS485 interface
  • 1x CAN 2.0B interface (up to 1Mbit/s)
  • 1x Real-time clock with battery backup
  • 2x UART interface (on header connector)
  • 2x I2C (on header connector)
  • 1x SPI (on header connector)
  • 1x TFT Panel RGB interface (up to 24bit color) on two different connectors
  • 1x Touchscreen connector (resistive 4 wires)
  • 9x GPIOs (on header connector)
  • 1x User LED
  • 1x Buzzer
  • 1x crypto engine
  • 1x true number generator
  • 1x JTAG connector

Power supply 15/30V

Software

LCD Supported

  • LVDS/TTL Connection
  • Touchscreen
  • Driver backlight LED

Peripherals Supported

  • Smartcard ISO/IEC 7816
  • RFID UHF
  • GSM/GPRS
  • Z-Wave
  • MODBUS Sensors/Actuators
Facebooktwitterlinkedinmail

Cosino Project

All the Cosino Project's CPU modules, carrier boards and peripherals are build for industrial environment and they are born to help developers in reducing time-to-market for all their ideas!

Tags Cloud

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close